Impeller Pump

12 VDC OPERATION SPECIFICATIONS: 

• DUTY CYCLE of 30 minutes running time or approximately 420 gallons of water or gasoline. Prolonged dry running should be voided.
• FLUID CAPACITY
  16 GPM maximum fluid capacity at outlet
• LIGHT WEIGHT
  Complete unit pump weighs 25 lbs. Complete unit pumps consist of power head, standpipe, nozzle holder, hose,
  nozzle, and battery cable & clips. Power head alone weighs 10 lbs.
• CIRCUIT BREAKER
  A thermal overload protection circuit breaker is provided for the motor. We recommend the use of a 30 amp slow-blow fuse or circuit breaker (P/N 32-418-015) at the power source to provide cord protection.
• VISCOSITY CAPACITY
  S.A.E. 10 W at 70°F.
• POWER CONSUMPTION
  Power consumption at 12 VDC is 324 watts with a corresponding current draw of 27 amps.
• ELECTRICAL CONNECTIONS
  Electrical Connections  are quick and easy. Simply connect one clip to the positive battery terminal and the other clip to the vehicle ground.
• MOTOR
  The motor is a 1/4 H.P. permanent magnet, explosion proof type. It includes permanently lubricated precision ball bearings for armature support. The motor dose not require any lubrication. 
• MAXIMUM STATIC HEAD
  30 ft. (3/4″ hose).

STANDPIPE ASSEMBLES
For use with all Power Heads

FEATURES:

• Four lengths are available; 24″, 30″, 38″ and 48″. Custom lengths are possible.
• Unique impeller design allows for almost 100% recovery of liquid from container.
• Rotating collar adaptor allows installation without spinning entire pump and hose assembly 

---

FLUID COMPATIBILITY – Partial List

The following is a partial list of fluids that may be used with Standpipe Assemblies. A more complete application list is available upon request. Before using any solutions with Standpipes other than those listed consult manufacturer.

Gasoline, Diesel Fuel, Water, Anti-freeze, Butyl Alcohol, Dry Cleaning Fluids, Ethylene Glycol, Fuel oils (No. 1, 2 amd3), Glycols, Hydraulic Fluids, Insecticides (water base type), Jet Fuel (JP-4-5-6), Kerosene, Lacquer Solvents, Lubricating Oil, Methanol, Mineral Oil, Sea Water, Trichlorethlene, Toluene, Xylene.