6012 POWER HEAD 12 VDC
- Pumps 16 gpm at outlet
- Interchangeable with all Standpipe Assemblies
- Instantaneous fuel delivery
- Ideal for use in multiple standpipe situations
- 30 minute duty cycle
12 VDC OPERATION
Delivery of Water in Gallons per Minute
Total Discharge Head (Water)* 0' 5' 10' 15' 20' G.P.M. 16 12 10.5 9 6
12 VDC OPERATION SPECIFICATIONS:
- DUTY CYCLE of 30 minutes running time or approximately 420 gallons of water or gasoline. Prolonged dry running should be voided.
- FLUID CAPACITY
16 GPM maximum fluid capacity at outlet
- LIGHT WEIGHT
Complete unit pump weighs 25 lbs. Complete unit pumps consist of power head, standpipe, nozzle holder, hose,
nozzle, and battery cable & clips. Power head alone weighs 10 lbs.
- CIRCUIT BREAKER
A thermal overload protection circuit breaker is provided for the motor. We recommend the use of a 30 amp slow-blow fuse or circuit breaker (P/N 32-418-015) at the power source to provide cord protection.
- VISCOSITY CAPACITY
S.A.E. 10 W at 70°F.
- POWER CONSUMPTION
Power consumption at 12 VDC is 324 watts with a corresponding current draw of 27 amps.
- ELECTRICAL CONNECTIONS
Electrical Connections are quick and easy. Simply connect one clip to the positive battery terminal and the other clip to the vehicle ground.
The motor is a 1/4 H.P. permanent magnet, explosion proof type. It includes permanently lubricated precision ball bearings for armature support. The motor dose not require any lubrication.
- MAXIMUM STATIC HEAD
30 ft. (3/4" hose).
For use with all Power Heads
- Four lengths are available; 24", 30", 38" and 48". Custom lengths are possible.
- Unique impeller design allows for almost 100% recovery of liquid from container.
- Rotating collar adaptor allows installation without spinning entire pump and hose assembly
FLUID COMPATIBILITY - Partial List
The following is a partial list of fluids that may be used with Standpipe Assemblies. A more complete application list is available upon request. Before using any solutions with Standpipes other than those listed consult manufacturer.
Gasoline, Diesel Fuel, Water, Anti-freeze, Butyl Alcohol, Dry Cleaning Fluids, Ethylene Glycol, Fuel oils (No. 1, 2 amd3), Glycols, Hydraulic Fluids, Insecticides (water base type), Jet Fuel (JP-4-5-6), Kerosene, Lacquer Solvents, Lubricating Oil, Methanol, Mineral Oil, Sea Water, Trichlorethlene, Toluene, Xylene.
HERBICIDE COMPATIBILITY - Partial list
The following is a partial list of commercially available herbicides that may be used with Standpipe Assemblies. Before using any solutions with Standpipes, other that those listed, consult manufacturer.
|CIBA-GEIGY||Aatrex, Bicep, Dual|
|Monsanto||Bronco, Lasso, Roundup|
|Stauffer||Eptam, Eradicane, Sutazine, Sutan, Sutan +|
|Mobay Chemical Corp.||Turbo, Sencor, Salute|
|Elanco Products -|
|Div. Eli Lilly Co.||Treflan, Balan, Surflan|
|Dow Chemical Co.||2-4-D, Esteran|